Universal Quick Charger BRAUN 1-For-All SMART with 5 LED’s for rechargeable lithium-ion- and lithium-polymer batteries for most of the digital photo cameras, Camcorders, mobiles and MP3/4 players
Technical Specifications:
- Battery control when battery is inserted and indication of remaining capacity with LED’s.
- Micro-processor control and monitoring of all loading procedures.
- Charging current DC 3.6V/3.7V = 900mA; 7.2V/7.4V = 600mA.
- Disconnection by –Delta V when batteries have been charged.
- There are two contact pins which can easily adjusted to the contacts of the rechargeable lithium battery by an included plastic pin. Don’t mind the polarity as there is an automatic polarity detection.
- Charging process is indicated by 4 LED’s while batteries are recharged. The capacity level just in process is displayed by the flashing LED indicator while the other LED indicators for the charging levels already obtained are green.
- Short-circuited batteries or those which are defective can’t be recharged and the fifth LED indicator flashes red.
Included in Delivery:
A charging plug with electronical voltage detection of between 100V – 240V, a car-charging-cable and one adjusting pin to adjust the contact pins are included.
*the following batteries can not be loaded: batteries which exchange data with the camera or the original battery charger, e.g CanonBP-809, BP819, BP827 oder Canon LP-E6. Batteries with other voltage, e.g. CR-V3, EN-EL4 with 11.1V, batteries with special contact pins, e.g Koyocera BP-800/1000 Leica M8
Note! Info/Data/Security Li-Ion/Li-Po batteries have more than two contact pins. For the loading procedure only the positive and the negative terminal may be contacted. The other contacts may not be contacted. The contacting of the Info/ DATA/Security of contacts B/C/D/T can damage the batteries.
